At the cemetery, burial place of the fence highlights, giving the tomb of a finished look. Fence may be installed directly in the ground and the top cap (concrete, granite, marble). It must be remembered that if you want install a fence in the cemetery above the cap, you should negotiate as attachment points with the cap manufacturers and the manufacturers of enclosures. The height of fences in the cemetery, as a rule, a 400-500mm. On request, the height fence may be different.
Grave fence is a rectangular or square shape with a gate or passage without a wicket. If the side railings on the grave is not more than 2m, then put five pillars: the corners of the fence and for the opening wicket, or (if the gate is adjacent to the corner post.) With a large amount of the cemetery fence post is recommended to put more and the middle part for rigidity. The gate can be opened by request: left, right, inside, outside. The width of the gate or opening in the fence, basically, is 600mm. Since we are manufacturers of enclosures in the cemetery, the fence can be any possible execution of design and drawing. Drawing on the fence may be different. In our catalog you can pick up a pattern for the cemetery fence, which for you is the most appropriate in the ratio of price – the look.
Price manufacture of fencing on the grave depends on the material from which it will be made, as well as the complexity of manufacturing. The simplest and cheapest are welded to the cemetery fence. Some sketches of fences with the prices you can be seen here. Fence with the elements of the machine are forging a more presentable appearance, and the price is slightly higher (to watch). Forged (forging art) fence in the cemetery will be different from all the fences that present at the cemetery. Wrought iron fence can serve as a monument that reflects the personality of the deceased: