The heat pump is a compact heating plant. Typically used for independent heating and hot water supply of residential and industrial premises. These systems are environmentally friendly because operate without combustion, and do not produce harmful emissions, as well as extremely cost-effective, because at the minimum power consumption give maximum results. Application of heat pumps different thermal power is a fundamentally new solution for heat and allow, depending on the season and working conditions to achieve maximum efficiency in their work. The heat pump has long life before overhaul (10 – 15 heating season) and runs a fully automatic mode. Plant maintenance is seasonal maintenance inspection and periodic monitoring mode.
Payback equipment does not exceed 2 – 3 heating seasons. The problem of reducing costs for heating, hot water, heating swimming pools in Russia, with its long and severe winters enough relevant today. Use for heating conventional sources of energy requires a substantial financial cost. Rising energy prices and high costs for their delivery to make to think about savings. In addition, the major shortcomings of traditional heating sources are low power (especially in small boilers) and economic efficiency. Simple and economical solution to this problem – heat pump. The principle of the heat pump. There are several basic types of heat pumps.
The most widely used heat pumps using air as a heat source. Principle of operation this device is that it is, taking the heat in the air, 'multiply' and uses it for heating and hot water. The design of the heat pump can be used in the temperature range, typical for our climate: – 25 C to +40 C. Heat pumps for quite a long time been used successfully overseas, and now find more and more widely used in Russia. Mass production of heat pumps established in many developed countries. According to the forecast of the World Energy Committee by 2020. the use of heat pumps for heating and hot water is 75%.